Google Icon
4.8
Star IconStar IconStar IconStar IconStar Icon
credit card icon
We Offer Financing

Gas Fittings Services in Burnaby, BC

HVAC gas fittings services in Burnaby, BC ensure safe connections, leak testing, and CO safety. Learn more about installation, repair, and documentation.

HVAC gas fittings services in Burnaby, BC provide safe, compliant gas connections for homes and strata properties, from installation and selection of approved fittings to testing, documentation, and warranty-backed workmanship. Our approach emphasizes corrosion prevention, accurate sizing, leak detection, and CO safety through combustion and venting checks. We diagnose issues with visual inspection, pressure testing, and electronic detection, then perform brazing or certified mechanical fittings as permitted. We emphasize permits, inspections, and record-keeping to streamline approvals and future servicing.

HVAC Gas Fittings Services in Burnaby, BC

Proper gas fittings and connections are critical to safe, efficient HVAC operation in Burnaby, BC. Whether you are servicing a single-family home, a townhouse, or a multi-unit building, correct selection, installation, testing, and documentation of gas connectors and fittings prevent leaks, reduce carbon monoxide risk, and ensure compliance with provincial inspection requirements. This page explains the types of services offered, common HVAC gas fittings issues in Burnaby, the inspection and repair process, and practical maintenance recommendations tailored to local conditions.

Why HVAC Gas Fittings Matter in Burnaby, BC

Burnaby’s coastal climate with damp winters and mild summers increases the chance of corrosion on exposed gas fittings and connectors. Many local homes and strata properties still use gas-fired furnaces, boilers, or fireplaces, making reliable gas connections essential for occupant safety and uninterrupted heating. In addition, older buildings often have outdated connectors or mechanical joints that no longer meet current code or manufacturer requirements. Timely attention to gas fittings reduces carbon monoxide exposure, prevents service interruptions, and simplifies permit inspections.

Common HVAC Gas Fittings Issues in Burnaby

  • Corroded or rusted fittings on outdoor or unprotected piping due to humidity and salt air exposure
  • Worn flexible connectors near appliances that show cracking, fraying, or stretching
  • Improperly joined pipes using non-approved mechanical fittings or poor brazing technique
  • Leaks at threaded joints or union fittings from aged sealant or degraded tapes
  • Incomplete or missing documentation for past repairs, complicating permit approvals
  • Carbon monoxide concerns stemming from improper combustion air, blocked vents, or intermittent leaks
  • Incorrectly sized connectors causing pressure loss and inefficient equipment operation

Types of HVAC Gas Fittings Services Provided

  • Selection and supply of approved fittings and gas connectors sized for the specific appliance and line pressure
  • Installation using approved joining techniques: brazing for permanent joints or certified mechanical fittings where permitted
  • Repair and replacement of worn, corroded, or non-compliant fittings and flexible connectors
  • Pressure testing and leak detection including pressure decay tests and electronic gas leak detectors
  • Carbon monoxide testing at appliance flues and living spaces using calibrated CO analyzers
  • Documentation preparation for permits, safety authority inspections, and final sign-off
  • Workmanship warranties on fittings installation and repair to protect homeowners and property managers

How We Diagnose Gas Fitting Problems

Diagnosing gas fitting issues begins with a methodical inspection and testing routine designed for HVAC systems:

  1. Visual inspection of all accessible fittings, connectors, and piping for corrosion, deformation, or signs of past repairs.
  2. Verification of connector type and size against appliance manufacturer specifications and local installation codes.
  3. Pressure testing of the gas line to confirm integrity. This includes isolating the section, applying test pressure, and monitoring for decay.
  4. Electronic leak detection to pinpoint slow leaks that may not register on pressure tests.
  5. Combustion and venting inspection to identify conditions that could promote CO production, including blocked vents, improper draft, or incomplete combustion.
  6. Documentation of findings with photos and a written report specifying required repairs, recommended fittings, and any compliance notes for permitting.

Installation and Repair Techniques Explained

  • Approved mechanical fittings: Used where code allows, certified mechanical fittings provide a secure connection without open flame. Proper selection and torque are essential to avoid leaks.
  • Brazing: For many steel or copper joints, brazing creates a durable, permanent seal. All brazing is performed using appropriate fluxes and filler metals, with attention to heat control to protect nearby components.
  • Flexible connector replacement: Flexible connectors must be the correct length and approved type for the appliance. They are routed and secured to avoid kinks or strain and replaced if older than manufacturer guidelines or showing visible damage.
  • Threaded joints and sealants: Only approved sealants and tapes for gas service are used. Threads are cleaned and sealed to manufacturer and code requirements.
  • Pressure testing and certification: After installation, a pressure decay test and leak-check will be completed. Results are recorded for permit documentation and inspector review.

Safety Checks for Carbon Monoxide and Leaks

Safety testing is an integral part of any HVAC gas fittings service in Burnaby. Tests include:

  • Room and flue CO measurements with calibrated analyzers while appliances operate under normal load
  • Flue draft and venting evaluations to ensure safe combustion gas discharge
  • Continuous monitoring during test procedures until readings are stable and within safe limits
  • Recommendations to correct combustion or venting problems that can lead to CO buildup

Permits, Inspections, and Documentation

Gas work in British Columbia typically requires documentation for permit approvals and final inspections by the provincial safety authority. Properly prepared paperwork helps strata councils and homeowners pass inspections without delay. Documentation provided includes:

  • Detailed repair and installation reports
  • Pressure test results and leak test recordings
  • Materials list identifying approved fittings and connectors used
  • Workmanship warranty documentation specifying the coverage period and scope

Workmanship Warranties and Quality Assurance

Professional HVAC gas fittings services include workmanship warranties that cover installation defects and ensure that replacement fittings meet manufacturer and code standards. Warranties are documented and provided with the final inspection package to simplify future maintenance or resale.

Maintenance Tips for Burnaby Homes and Buildings

  • Inspect visible gas connectors annually for signs of corrosion or wear, especially after wet winters.
  • Replace flexible connectors every time an appliance is replaced or if any damage is observed.
  • Keep appliance vents and flues clear of debris and ensure combustion air inlets are not blocked.
  • Schedule an annual HVAC tune-up that includes gas fitting inspection and CO testing.
  • Maintain records of all gas fitting work and pressure tests to streamline future inspections and transfers of ownership.

Conclusion

HVAC gas fittings services in Burnaby, BC are a crucial part of maintaining safe, efficient heating systems in the face of coastal humidity and a range of residential and strata building types. Proper selection, installation, testing, documentation, and warranty-backed workmanship reduce safety risks, prevent costly emergency repairs, and help ensure compliance with provincial safety and permit requirements. Addressing worn or corroded fittings promptly protects occupants from leaks and carbon monoxide exposure while keeping heating systems operating reliably.

Customer Testimonials

Go With Experience

star icon

I cannot recommend this company enough. We were horribly jerked around by Angels Heating and Cooling. Northwind took the time to answer all our questions, we're professional, timely, affordable and sent a great technician to fix our gas fireplace.

Lindsay H.
star icon

We had a duel fuel system installed by Northwind. Our experience from installation to post installation service has been amazing.

Ashish S.
star icon

Our fireplace had not been working. This was the only company that was willing to come out. Wes the technician was great. Diagnosed the problem and fixed it. Spoke to Deanna on the phone. She has awesome customer service skills. I would use them again and highly recommend them.

Bon.
star icon

A+ Customer Service!  We had a minor issue and they stopped by right away.  We've used them on residential and commercial buildings and they are always on top of everything.  Thank you to Chris as well!

Jill S.
star icon

We purchased and had Nothwind install a Valor gas fireplace for us. They did an excellent job. We did have a problem with the remote control that came with the unit but were very happy with the immediate response and repair from Northwind for warranty work.

Mark T.
star icon

I’ve been in the construction business for many years and the Northwind HVAC crew for sure rank up there in the number one spot. Without exception, all the work was carried out swftly, with journeyman style and with a friendly contractor/client relationship.

Robert H.